803 west 6th Ave
Denver, CO 80204
H-body parts and accessories
(970)-581-8134

       (970)-581-8134           Chassisguy@msn.com  
UNTIL FUTHER NOTICE WE ARE NOT OFFERING ANY OF THE FOLLOWING PRODUCTS!!!!!


H-body Parts

75'-81 H-body tubular, adjustable torque arm
attaches to stock rearend housing (2 bolt style) or can be used with Overkill Race Cars LLC 9" ford torque arm bracket.

$300.oo plus freight



71'-81' H-body tubular Bushing style front control arms

includes:

S10 ball joints
lower control arm based on later "deep pocket" control arms and will lower earlier cars approx. 1"
optional swaybar mount (+$50)
made from mild steel DOM tubing
100% tig welded
polyurethane bushings
new "ferrels" (lowers only)
2.5* of additional positive caster in upper and lower arms (5* total)
has camber correction built in for S10 spindle conversion

MADE IN USA


71'-81 H-body heim joint style front tubular control arms

Features include:
S10 or Monza ball joints
0*, 2.5* or 5* of additional positive caster built in
based on later model "deep pocket" lower control arms and will lower earlier car approx. 1"
4130 chromoly construction
100% tig welded
coilover shock mounts
optional stock type spring pocket (+$50)
optional swaybar mount (+50)
Fully adjustable

$850 plus freight

MADE IN USA





71'-81' H-body Tubular front K-member

Features include:

4130 tubing construction
100% tig welded
mounts to factory mounting points (bolts in!!)
optional Rack and pinion mounts (+$50)
approximately 8lb weight savings

$350 plus UPS shipping w/o rack mounts
$400 plus UPS shipping w/rack mounts

rack and pinion for ORC K-member $250 plus UPS shipping
Rack Mount bushing kit $30
ORC outer tie rod and billet adjuster kit $125


MADE IN USA



74'-81' H-body Rear tubular bumper mount

features include:

constructed with 4130 chromoly tubing
moves the bumper 1 1/2" closer to the body

aproximatley 21lb weight savings
100% tig welded

$150 plus freight

MADE IN USA



71'-81' H-body subframe connectors

Features include:
made from 1 5/8" either mild steel or chromoly
only hangs below "pinch weld" approx. 1"
can be encorperated into rear lower control arm mounts
tubing with open ends to allow you to run brake, fuel line or battery cable, etc. through

yes, it is for a set of 2 this was just the only pics i had of the SF connectors

$125 + freight for mild steel or $175 + freight for chromoly



75'-81 H-body adjustable panhard bar

Features include:
4130 chromoly construction
fully tig welded
chromoly heim joints
right and left hand threads for full adjustment
built in hex for easy adjustment.

$139.95 + freight




71'-75' H-body rear control arms

Features Include:
4130 chromoly construction
100% tig welded
polyurethane bushings on housing side (heim joint available)
swaybar mounts available (+$10)
chromoly heim joints

$319.99 + freight for UCA and LCA set


Website Builder